In this guide, we are going to show how to set up and run Instagram accounts with mobile rotating proxies. This guide is relevant to the aged and client’s accounts and aged niche accounts for the growing, which by default have a high trust score. For the fresh accounts – warming and tutorial guide you can find here (link will be added soon).
So, what we have:
- Jarvee software
- 10 x aged Instagram accounts, with avg age 3 years old
- 1 x mobile rotating proxy
Import accounts into the software:
It’s very important to verify accounts with delays. Go to General software settings – Social Platforms – Instagram and enable this tool to activate delays when verifying multiple accounts at once:
Then choose all of the accounts:
Click “Actions on selected profiles” button and then click “verify profiles” button from the drop-down list of actions
In this case, Jarvee will auto verify accounts with the delays which are set on above. The verification process may take some time, but keep patience and wait until it would be done.
While the verification process – accounts may get an email or phone verification request. It’s common. After verification is done, it’s necessary to wait 12-24 hours.
First of all, lets set up a general account’s settings. Go to: social profiles –>choose specific account–> Show advanced settings and setup account like on a screen below:
Very important to set the account profile’s settings exactly as on a screenshot. When/if account gets an action blcok, in complex with this setup and mobile rotating proxy – Jarvee will try to use EB to make an action. If it would be failed – software will suspend the tool. While this time proxy will rotate a several times, account gets new clean IP and continue the actions. It’s exactly one of the main features of mobile rotating proxies
You can copy these settings for all accounts you want at once to avoid manual setup for every single account. To do that you have:
- Go to: social profiles –>Choose specific account–> Show advanced settings->Scroll a bit down and click “Copy Settings” button
- Mark the accounts you want to copy the settings to, activate checkbox “copy tool settings to the selected account” and click “OK” button
If the accounts were imported with the specific “Tag name” or it was added manually for the accounts, you can use the “Filter by tag” feature to sort your accounts by a particular tag.
The list of settings to set and copy:
- Abort search after
- Delay all tools after an account is verified
- Do no auto phone verify (if you want to avoid phone verification in auto mode)
- Do not reset IDs when changing the account proxy
- Do not use embed browser to follow on Instagram
- Do not use embed browser to log in on Instagram
- Keep account valid when changing the account proxy
- Night mode
- Suspend tool when temporary blocked
- Sync right before night mode
- Use embed browser to follow when action blocked
- Use embed browser to like when action blocked
Take a look: at this step – you just copy the seеtings, its state. You do not enable or disable specific tools. In case its needed to edit some tools, for example: change the night mode or enable auto phone verification – do that before copy the settings or manually after the copying is done
Now its time to set up the tools.
The first tool we will set is a “Story tool”. Most users underestimate the value of this tool, but it’s one of the most important tools at all. We would even say the main tool for the account warming up process.
- Story tool
For the story tool – we do not use any kind of filters, because it’s simply not needed. The main idea of running this tool is: to warm up the account before moving it to more meaningful tools. As a source, usually, we use just random pages. For example, https://www.instagram.com/cristiano/ or https://www.instagram.com/marvel/, because we need huge sources with a big number of followers inside to get enough stories to view for all of the accounts running in the software. This tool has almost no limits, so to view 200-250 stories per day would be enough. Once the tool is set, let’s keep it running for the next two days.
In 1-2 weeks later, when the warming process would be done – you can change the sources of the “story tool” to watch the stories of the account’s followers.
- Save Posts tool
“Save posts tool” is designed as its clear from its title to save posts of users. We will use it as an additional tool to get human behavior actions. To save 2-3 posts per day would be more than enough. As a source usually we use accounts that publish photos regularly and have a big number of followers, like https://www.instagram.com/sommerray/ or https://www.instagram.com/disney/.
At this stage, we can proceed to configure the other tools.
- Follow tool
Important: Because of the Instagram update on June 1, 2019 – the allowed number of follows or follow actions per day were reduced to around 200 or 6000 per month. Also, we have to admit – every single account has its own trust level and allowed the number of follows daily and in total per month. The only 1 way to identify this number is to test, that’s why if you want to run your accounts safe – the number of 200 follows per day would be the best solution. That’s why we will use the next settings:
With these follow settings – account start to follow 25-50 users on the first day and will slowly increase every single day number or users to follow per operation and the total number of users to follow per day until it reaches these numbers:
According to the “Follow tool” settings above – the actions are split across the whole day. In case you know your target audience is active in some particular period of the day – you can change these settings by increasing “Follow people per operation” and reducing the timings in “Wait between” to necessary. Anyway, the “max Follow per day” should be around 200 and the number of actions per 1 hour must not be more than 60
- Like tool
Every new day software will increase the number of likes per operation and the total daily number of likes until it reaches these numbers:
The “like tool” was not affected by June 1, 2019, an Instagram update and it still possible to perform more than 200 likes daily per account, but still advisable to keep “max likes per day” around 200-250.
- Unfollow tool
The software will start to unfollow users 3-4 days later after it been followed. Then, every new day the number of users to unfollow per operation and the total number of user to unfollow per day would be slowly increased until it reaches these numbers:
- Contact tool
The settings are pretty simple. There are only 3 factors we have to note
- Do not send more than 50 messages per 1 account per day. Its a maximum limit and its impossible to push it with any kind of proxies or accounts, so pls don’t even try.
- Do not send every single message often than one time per 15 minutes.
- Spintax – its the most important part. If you are using poor spintax – accounts can be simply flagged and disabled very soon.
The general method to check hows good your spintax is:
- go to http://sp1n.me/index.html
- upload your spintax template into the box
- check replacement rate
The replacement rate of the spintax template without emojis must not be lower than 500%.
Poor spintax template:
Strong spintax template:
At this stage, all we have to do is keep the accounts running. That’s all.
In additional here is a quick video look on full setup mentioned above :
In around September – October 2018 Instagram updated the algorithms and that’s why a lot of users experience issues related to the posting. If to say simply there are 2 reasons: 1) Proxy 2) Account’s trust level. On a video above we posted the same photo with the same caption to 3 different accounts. The posting was successful without any issues. Accounts got no phone verification requests and 24 hours later posts are not disappeared.
The settings above are made for the aged niche accounts (fan pages) and the accounts of clients (client management) which been running for the last days or at least weeks, then recently been attached to the new proxy and require the right warming up settings.
For the accounts which have not been recently running – the warming up settings are pretty the same except for the one moment – on the first week of the warming up process – accounts should perform only several actions per “follow”, “unfollow” and “like” tools without increasing the number of actions daily. Starting week #2 – just switch to the settings mentioned above.
For the fresh newly created accounts – the warming up process is absolutely different. This type of accounts requires much longer warming up process with super slow actions. We strongly do not advise to use it. But if you still going to run it – run it on your own risk or only in case you are sure in these accounts, you know the method it was created with and you understand what you are doing! Anyway, the link for the warming up settings for the fresh newly created accounts would be added soon.
In addition: the setting on above implies the usage of 10 accounts and one mobile proxy simultaneously. It is possible because of the quality and trust level of mobile IPs. To perform the daily number of actions per one account is needed around 12 hours, that’s why in case it’s needed, and you want to run accounts as safe as possible – these settings could be upgraded: just split accounts into the two shifts, where the first shift of accounts will perform from 12:00 – 23:59 and the second from 00:00 – 11:59. In this case workload on the IP would be highly reduced.
All settings above, are just recommended settings. If you have your own settings and you know that yours are better – feel free to use it! Instagram marketing was never easy. It is like a cat and mouse game. Every single day it becomes more difficult.
Methods that worked yesterday – may no longer work today. All changes fast and you must adapt to these changes.
But don’t give up and do not forget: the more complicated niche – the less competition it has.
And as always – We wish you have a good day and have a good profit! 😎